Home
About Us
Product Center
Blog
Applications
Online Message
Contact Us
22
2022-10
Public Notice: Emergency Response Plan for Environmental Incidents at Fengcheng Xinying Metal Products Co., Ltd.
2022-10-22
15
2022-02
Steady progress promotes high-quality development of the non-ferrous metals industry
On January 26, the first "Online Metal Week" of 2022 and the seminar on futures markets assisting the high-quality development of the non-ferrous metals industry, hosted by the Shanghai Futures Exchange, were successfully held. Non-ferrous metal industry professionals and futures market experts reviewed and looked ahead at the performance of the non-ferrous metals market, and conducted detailed analyses of the nickel and tin markets, which have recently attracted much market attention. Both sides also engaged in in-depth discussions on measures for futures markets to serve the high-quality development of the non-ferrous metals industry.
2022-02-15
In 2022, the non-ferrous metals industry will accelerate the research and development and promotion of key green and low-carbon technologies and the energy-saving and carbon-reducing technological transformation.
According to the Ministry of Industry and Information Technology, in 2021, the non-ferrous metals industry overcame the adverse effects of repeated epidemics, seized opportunities for recovery in both domestic and international markets, continued to deepen supply-side structural reforms, ensured the effective supply of industrial chains and supply chains, accelerated the intelligent, green, and high-end transformation of traditional industries, and maintained overall stable operation.
In 2021, the non-ferrous metals industry operated relatively steadily
The Ministry of Industry and Information Technology (MIIT) recently released the operating conditions of the non-ferrous metals industry in 2021. In 2021, the non-ferrous metals industry overcame the adverse impacts of repeated outbreaks of the epidemic, seized opportunities for recovery in both domestic and international markets, continued to deepen supply-side structural reforms, ensured the effective supply of industrial chains and supply chains, accelerated the intelligent, green, and high-end development of traditional industries, and achieved overall stability in industrial operation.
14
2019-08
China Copper accelerates the transformation of blueprints into reality
China Copper's 2019 mid-year work conference was held in Chalco Tower. Ge Honglin, Secretary of the Party Leadership Group and Chairman of Chalco Group; Liu Jianping, Member of the Party Leadership Group and Vice General Manager of Chalco Group, Secretary of the Party Committee and Chairman of China Copper; and Li Mingqiu, Deputy Director of Yunnan Provincial State-owned Assets Supervision and Administration Commission attended the meeting and delivered speeches. Ge Honglin pointed out that in the first half of the year, China Copper's net profit attributable to the parent company ranked first among all sectors, making a positive contribution to the Group's record-high performance. This marks the successful achievement of a win-win goal for the restructuring of China Copper and Yunnan Metallurgy, better integration than expected, better business performance than expected, and better Party building work than expected. This fully demonstrates the success of the strategic cooperation between Chalco Group and the Yunnan Provincial Party Committee and Government, fully demonstrates that the new leadership team of China Copper is capable of fighting tough battles and winning them, that the cadres and employees of China Copper are politically conscious, consider the overall situation, and dare to take responsibility, are worthy of the Party group's trust and entrustment of important tasks, and that the development of the new China Copper is full of hope. Ge Honglin demanded that, in the next step, the new China Copper should accelerate the transformation of blueprints into reality. First, better business results. To be a pioneer, make every effort to cope with various risks and challenges, and do everything possible to mobilize the enthusiasm and creativity of all employees, further releasing the dividends of strategic restructuring and deepening reforms, outperforming the market, outperforming the overall trend, outperforming peers, and outperforming ourselves, ensuring the over-fulfillment of all annual targets. Second, faster reform and innovation. To firmly adhere to the general guideline of reform, innovation, transformation, and upgrading, continue to promote supply-side structural reforms, accelerate asset integration, improve and strengthen the two core main businesses of copper and lead-zinc, optimize the upstream and downstream industrial chain, and innovate the development of supporting industries. In accordance with the "4+4+4" strategic layout, continue to optimize the industrial layout and implement the overseas China Copper strategy. Third, stricter safety and environmental protection. To adhere to a problem-oriented approach, come up with effective solutions, use practical measures, and take decisive actions to resolutely win the "three major tough battles" and establish a responsible image of a central enterprise. Ge Honglin emphasized that the new China Copper should lead high-quality development with high-quality Party building. First, new effectiveness in thematic education. To integrate learning throughout, conduct in-depth investigations and studies, find and identify problems, dig deep into the root causes, and clarify the direction of efforts and improvement measures. To prescribe the right medicine, improve systems and mechanisms, and plug management loopholes. Party and government leaders at all levels of enterprises should take the lead in learning, conducting investigations and studies, examining problems, and implementing rectification, using excellent business achievements to test the effectiveness of thematic education. Second, new measures in the Party's management of cadres. To resolutely implement the Party's organizational line in the new era and implement the standards of good cadres in the new era who are loyal, clean, and responsible. To adhere to strict management and care, and to implement the strict management of cadres throughout the process of cadre team building. Third, new achievements in strict Party governance. To resolutely do a good job in the "second half" of the rectification of inspection, strengthen rectification and implementation, and the application of results, promoting reform and development. To promote the construction of a system that prevents corruption, dares not to be corrupt, and does not want to be corrupt, tightening the institutional "cage," making the system "have teeth," and making discipline "electrified." To strengthen style construction, strictly enforce the spirit of the eight central regulations, and continue to rectify the "four winds" and transform the work style. With a work style of "four more and one better," embark on a new journey to build a world-class copper, lead, and zinc enterprise with global competitiveness. Liu Jianping pointed out that China Copper is in a critical period and an opportunity period of restructuring and integration, transformation and upgrading, and accelerated development, shouldering the high hopes of the Group's Party group and the Yunnan Provincial Party Committee and Government, and must act according to the situation, follow the trend, and seize the opportunity to embark on a new journey of high-quality development. First, to keep in mind the original aspiration and mission. Adhere to the goal of building "two platforms, one base, and three trillion-yuan industries," sticking to one blueprint to the end, and running one after another, composing a new chapter of high-quality development. Second, to face advantages and disadvantages squarely. To make overall plans, turn disadvantages into advantages, and use dynamic transformation to drive quality transformation and efficiency transformation to achieve high-quality development. Third, to firmly adhere to the target direction. Adhere to comprehensive and strict Party governance, comprehensive deepening of reforms, comprehensive and precise management, and innovative "addition, subtraction, multiplication, and division," accelerating quality transformation, efficiency transformation, and dynamic transformation, and building an integrated development model for the entire industrial chain. Liu Jianping emphasized that in the second half of the year, China Copper will continue to thoroughly implement the important instructions of central leaders on the Party's work in the Group, in accordance with the deployment of the Group's Party group and the arrangements of the mid-year work conference, taking the opportunity of carrying out the "不忘初心、牢记使命" thematic education and holding the company's first Party Congress, implementing the annual work's general requirements of "deep reform, refined management, rapid integration, and multiple profits," maintaining the state of "sprinting from the start and decisive battle from the beginning," and winning a new victory in the starting year of the new China Copper. First, give full play to the leading role of Party building work. Continue to earnestly carry out the "不忘初心、牢记使命" thematic education, carefully prepare and hold a successful first Party Congress, deepen the construction of grassroots Party organizations, continuously deepen comprehensive and strict Party governance, and accelerate the promotion of enterprise culture construction. Second, make every effort to complete the annual production and operation targets. Increase efforts in reform breakthroughs and cultivate new impetus; increase investment in production and operation and strive for new achievements; accelerate the consolidation of the foundation and strictly prevent risks. Third, build a high-quality professional cadre and talent team. Adhere to the Party's management of cadres, strive to be capable cadres, and make up for the shortage of talents. Xu Bo, Assistant General Manager of Chalco Group, Deputy Secretary of the Party Committee and President of China Copper, delivered a work report for the first half of the year. The report summarized the current situation and goals of the new China Copper, reviewed the achievements made by China Copper in the first half of the year, and deployed various tasks for the second half of the year. Since 2019, China Copper has seized the historical opportunity of strategic restructuring, implemented comprehensive and strict Party governance and comprehensive and strict enterprise governance, achieved various goals in the first half of the year, and the new China Copper has made a good start. In the second half of the year, China Copper will earnestly implement the spirit of the Group's mid-year work conference, focusing on resource reserves, overseas layout, and capital operation, continuously carrying out special work, accelerating project construction, accelerating reform and innovation, effectively preventing and resolving risks, resolutely winning the "three major tough battles," comprehensively and strictly strengthening Party building, resolutely completing annual tasks, and laying a solid foundation for accelerating the pace of high-quality development. The meeting organized the study of the spirit of Chalco Group's 2019 mid-year work conference and listened to the report on China Copper's mid-year economic operation and the report on the selection and appointment of personnel from 2017 to 2018. The participating representatives were divided into groups according to mines, smelting, processing, and cooperative enterprises to discuss the development ideas, directions, and strategic measures of the new China Copper.
2019-08-14
Complete Guide to Basic Knowledge of Metallic Materials
Overview: Metal materials are a general term for materials composed primarily of metallic elements or with metallic properties. These include pure metals, alloys, intermetallic compounds, and special metal materials. (Note: Metal oxides (such as aluminum oxide) do not belong to metal materials) 1. Significance: The development of human civilization and social progress are closely related to metal materials. The Bronze Age and Iron Age, which followed the Stone Age, were both significantly marked by the application of metal materials. Today, a wide variety of metal materials have become an important material foundation for the development of human society. 2. Types: Metal materials are generally divided into ferrous metals, non-ferrous metals, and special metal materials. (1) Ferrous metals, also known as steel materials, include industrial pure iron with more than 90% iron content, cast iron with 2% to 4% carbon content, carbon steel with less than 2% carbon content, and various structural steels, stainless steels, heat-resistant steels, high-temperature alloys, stainless steels, precision alloys, etc. In a broad sense, ferrous metals also include chromium, manganese, and their alloys. (2) Non-ferrous metals refer to all metals and their alloys except iron, chromium, and manganese. They are usually divided into light metals, heavy metals, precious metals, semimetals, rare metals, and rare earth metals. The strength and hardness of non-ferrous alloys are generally higher than those of pure metals, and they have higher resistance and a smaller resistance temperature coefficient. (3) Special metal materials include structural metal materials and functional metal materials for different purposes. These include amorphous metal materials obtained through rapid solidification processes, as well as quasicrystals, microcrystalline, nanocrystalline metal materials; also, stealth, hydrogen-resistant, superconducting, shape memory, wear-resistant, vibration damping alloys and metal matrix composites, etc. 3. Properties: Generally divided into process properties and service properties. The so-called process properties refer to the properties exhibited by metal materials under specified cold and hot processing conditions during the manufacturing process of mechanical parts. The good or bad process properties of metal materials determine its ability to be formed during manufacturing. Due to different processing conditions, the required process properties are also different, such as casting performance, weldability, forgeability, heat treatment performance, machinability, etc. The so-called service properties refer to the properties exhibited by metal materials under service conditions, including mechanical properties, physical properties, and chemical properties. The good or bad service properties of metal materials determine its application range and service life. In the mechanical manufacturing industry, general mechanical parts are used at normal temperature, normal pressure, and in non-strongly corrosive media, and each mechanical part will bear different loads during use. The ability of metal materials to resist damage under load is called mechanical properties (formerly also known as mechanical properties). The mechanical properties of metal materials are the main basis for part design and material selection. Different external load properties (such as tensile, compressive, torsional, impact, cyclic loads, etc.) will require different mechanical properties of metal materials. Commonly used mechanical properties include: strength, plasticity, hardness, impact toughness, multiple impact resistance, and fatigue limit, etc.
12
2019-10
Create Yuan Futures: Short-term adjustment of Shanghai copper, high probability of upward trend
Shanghai Futures Exchange copper prices rose slightly. The main June contract closed at 43,530 yuan/ton, up 250 yuan, an increase of 0.58%. At 3:00 PM on the same day, the London March copper price was US\$6,042/ton, and the Shanghai-London price ratio was 7.20, lower than 7.21 on the previous trading day, with Shanghai futures copper rising less than the London market. Total contract turnover was 426,998 lots, and open interest increased by 282 lots to 819,646 lots. Main contract turnover was 235,236 lots, and open interest decreased by 3,328 lots to 375,940 lots. The latest price of Shanghai Metals Market No. 1 copper is 42,430-42,550 yuan/ton, with a premium/discount of (discount) 140-(discount) 60. 2. Market Analysis Long-term: Breaking through long-term support, oscillating downward Mid-term: Rebounding from the bottom Short-term: Narrow range fluctuation 3. Market Information On the spot market, today's Shanghai electrolytic copper spot price against the current month contract was quoted at a premium of 60 yuan/ton-100 yuan/ton, the flat copper transaction price was 43,550 yuan/ton-43,610 yuan/ton, and the premium copper transaction price was 43,570 yuan/ton-43,650 yuan/ton. SHFE copper's upward momentum was hindered. Holders hoarded goods in the morning session, waiting for the market to rise. After low-priced goods were released, they were quickly absorbed by speculators. Flat copper was the first to raise the premium to ship goods, and good copper was passively pushed to ship goods. There was still no price difference between brands, but as the price of good copper rose to around 100 yuan, market trading was significantly suppressed, and a stalemate mode was restarted. However, holders began to pay attention to the inter-month price difference before delivery, and speculators increased short-term operations. Downstream buyers purchased on demand, and overall trading remained lukewarm. On the industrial side, according to foreign news on March 2, Chilean Mining Minister Aurora Williams said on Monday that the Chilean government still maintains its 2015 copper production forecast at 6 million tons, which will be a 5% increase from 2014 levels. He said that the decline in international oil prices will help high-cost producers maintain output growth. He also said that the Chilean government will take measures to help small miners cope with high production costs. According to a Lusaka report on February 23, Zambian President Edgar Lungu said on Facebook that if the Lumwana copper mine in the country is idled by Barrick Gold Corporation, the Zambian government may need to consider finding new strategic partners for the mine's other owner, state-owned company ZCCM-IH. According to a Tokyo report on January 20, the Japan Wire and Cable Manufacturers Association reported on Tuesday that Japan's December copper cable shipments (including sales and exports) fell 2.9% year-on-year to 60,000 tons. On the macro side, the People's Bank of China decided to lower the benchmark interest rates for RMB loans and deposits of financial institutions from March 1, 2015. The benchmark interest rate for one-year loans of financial institutions will be lowered by 0.25 percentage points to 5.35%; the benchmark interest rate for one-year deposits will be lowered by 0.25 percentage points to 2.5%. At the same time, in conjunction with the promotion of interest rate market-oriented reforms, the upper limit of the floating range of deposit interest rates of financial institutions will be adjusted from 1.2 times the benchmark deposit interest rate to 1.3 times; other benchmark interest rates for various levels of loans and deposits and personal housing provident fund loan and deposit interest rates will be adjusted accordingly. On Monday, data released by the Institute for Supply Management (ISM) showed that the US ISM manufacturing PMI was 52.9 in February, below the expected 53, falling for the fourth consecutive month and hitting a 13-month low. The expansion pace of US manufacturing in February slowed further compared to January.
2019-10-12
Analysts predict copper prices will fluctuate and rise next week, focusing on trade data
After the short holiday, although the rebound of the US dollar index suppressed bulk commodities, the Shanghai Futures Exchange copper market remained stable this week under the support of the peak season effect, maintaining a narrow range of fluctuations. The total open interest of Shanghai Futures Exchange copper remained at a record high level of over 800,000 lots, and long and short positions were still in a stalemate with no obvious directional signals. How will Shanghai Futures Exchange copper perform next week? SMM's survey of special analysts shows: 8 people predict a fluctuating rise (+/-1%), 5 people predict a rise, 3 people predict a fluctuating fall (+/-1%), and 1 person predicts a fall
Another innovation studio of China Copper Industry wins provincial title
Our Network News Recently, the Yunnan Provincial Federation of Trade Unions decided to name Xu Chengdong's Innovation Studio as the second batch of "Yunling Craftsman Innovation Studios." This is another honor for China Copper in the construction of the industrial workforce in the new era, following the naming of Geng Jiasheng's Innovation Studio as the first batch of "Yunling Craftsman Innovation Studios" by the Yunnan Provincial Federation of Trade Unions in 2018. China Copper has also become the only unit in the province to have 2 "Yunling Craftsmen" and 2 "Yunling Craftsman Innovation Studios." It is understood that since its launch in 2016, the Yunnan Provincial Federation of Trade Unions' "Yunling Craftsman" selection activity has attracted much social attention. Based on a strict review process, it selects industry elites with craftsmanship, superb skills, leadership, and outstanding contributions, embodying the qualities of a craftsman. Two selection activities have been carried out, naming a total of 29 "Yunling Craftsman Innovation Studios." Xu Chengdong is the workshop director of the smelting workshop at Yunnan Chihong Resources Comprehensive Utilization Co., Ltd., and he has been engaged in lead smelting for 23 years, sticking to the Isa furnace for nearly 13 years. Over the years, he has diligently studied, been brave in practice, and constantly innovated. He has not only demonstrated superb lead smelting technology but also demonstrated the model worker spirit and craftsman spirit of fearlessness, excellence, and pursuit of excellence, becoming a core figure in overcoming the difficulties of lead smelting in the Isa furnace, making positive contributions to improving the company's economic efficiency, and showcasing the style of Chinese lead smelting industry workers. In recent years, Xu Chengdong and his team have devoted themselves to research in the process of participating in multiple projects, proposing good solutions to technical problems such as excessively high slag lead, short gun life, high dust emission rate, and furnace body shaking during the smelting and reduction process. At the same time, Xu Chengdong, using the studio as a platform, has taught and guided apprentices. He and his team have organized and implemented more than 10 innovative projects, obtaining 5 national patents and authorizations.
30
2020-10
Selection of copper-clad steel plating process
The special nature of wire processing requires different copper plating processes than those used for conventional steel parts. Therefore, selecting a suitable copper plating process for wire processing is a crucial issue. The choice of electroplating process usually depends primarily on the requirements for the coating of the product itself. That is, the product is processed first, then electroplated. For example, thickness, brightness, hardness, and dispersion ability. Some also have requirements for current efficiency and deposition rate. Then there is the required pre-plating, intermediate plating, and surface plating. The characteristic of wire electroplating is that the wire processing and electroplating processes are sometimes carried out simultaneously. That is, some are plated after drawing, and some are drawn after plating. Even the electroplating of finished wires is carried out under the traction of the wire-taking machine. The selected process, in addition to the requirements for the coating according to the different Applications of the wire, must also consider the adaptability of the electroplating process to factors such as the wire running speed, the number of traction heads, and the length of the processing line. For CO2 gas-shielded welding wires, due to the strict limitation on the amount of copper attached to the welding wire, for example, the copper content per unit volume should be within 0.52 (mass fraction) of the solder, which is an extremely thin coating, the chemical immersion method, i.e., displacement copper plating, can meet the requirements. However, due to the traditional displacement copper plating method currently used in China, its bonding strength and coating color cannot meet the product requirements. In practice, the process of first immersion plating and then drawing is adopted, so that the copper layer is expanded and thinned during drawing to meet the product requirements. This method often results in coating peeling and base metal exposure. Therefore, selecting a copper plating process with good bonding strength and ductility is crucial for gas-shielded welding wires. Until a new process that enables successful one-time chemical copper plating of finished wires appears, the process of drawing to an intermediate wire diameter, copper plating, and then drawing into a finished product can only be used. Cyanide copper plating or dull acid copper plating should be suitable for this processing process. Due to the high toxicity of cyanide, it is rarely used in the metallurgical wire processing industry. The currently more popular method is still chemical immersion copper plating followed by thickening copper plating and then drawing. The thickening copper plating used is acid copper plating or pyrophosphate copper plating. The chemical method is also mostly used for copper plating in the flat wire processing industry. Traditional displacement copper plating uses a process of copper sulfate plus sulfuric acid. Only a very thin coating can be displaced in a very short time, and the bonding strength is not strong when the copper is thickened on top. If the immersion time is too long in this chemical displacement plating, not only will the coating thickness not increase, but the coating will also become loose and porous, and the iron substrate will also be corroded, greatly reducing the wire strength. The improved method is to add additives with surface retarding effects to the displacement copper plating solution to make the displacement process proceed in an orderly manner. The ideal additive also has a certain brightening effect. For wire products that require a certain thickness or even a thicker coating, the use of displacement plating as a base layer must be very careful. At least until a reliable base plating process suitable for thick copper plating is available, for thick copper plating, the reliable process should still be electrochemical pre-plating. Mature pre-plating processes include cyanide copper nickel plating and high P ratio pyrophosphate copper plating. Weighing the various advantages and disadvantages, nickel plating is better as a pre-plating base in wire drawing electroplating. The thickening copper plating can use acid sulfate copper plating. This is because, after process adjustment, acid copper plating can meet the requirements of high-speed electroplating. The current density can reach 30-50 A/dm2, greatly increasing the deposition rate. In comparison, cyanide copper plating is not suitable due to environmental pollution problems, while pyrophosphate copper plating is not suitable for high-current operation due to its complex composition and high cost. Tests show that in high-speed electroplating in acid copper plating, when the current density increases, the deposition rate of the coating also increases simultaneously, and the approximate relationship is shown in Table 1.
2020-10-30